Your Cart

Pulse Oximeter Coronavirus (COVID-19) Product Price

Buy Pulse Oximeter Coronavirus (COVID-19) Product in Bangladesh At the Best Price

If you are searching for an authentic online store from where you can order and get Pulse Oximeter Coronavirus (COVID-19) Product for your shop or office in Bangladesh at the minimal cost, you have come to the right place. We, The Unix Network. stock Pulse Oximeter Coronavirus (COVID-19) Product of renowned brands. You can check the price of Pulse Oximeter Coronavirus (COVID-19) Product in BD from Unix Network website. We provide original brand warranty and 100% genuine products. Feel free to compare the price of Pulse Oximeter Coronavirus (COVID-19) Product in Bangladesh local shops with ours. We are capable of delivering your desired Pulse Oximeter Coronavirus (COVID-19) Product in Bangladesh at your doorstep at the least price.

Pulse Oximeter Coronavirus (COVID-19) Product

A pulse oximeter is a medical device that indirectly monitors the oxygen saturation of a patient's blood (as opposed to measuring oxygen saturation directly through a blood sample) and changes in blood volume in the skin, producing a photoplethysmogram that may be further processed into other measurements.[41] The pulse oximeter may be incorporated into a multiparameter patient monitor. Most monitors also display the pulse rate. Portable, battery-operated pulse oximeters are also available for transport or home blood-oxygen monitoring.


Pulse oximetry is particularly convenient for noninvasive continuous measurement of blood oxygen saturation. In contrast, blood gas levels must otherwise be determined in a laboratory on a drawn blood sample. Pulse oximetry is useful in any setting where a patient's oxygenation is unstable, including intensive care, operating, recovery, emergency and hospital ward settings, pilots in unpressurized aircraft, for assessment of any patient's oxygenation, and determining the effectiveness of or need for supplemental oxygen. Although a pulse oximeter is used to monitor oxygenation, it cannot determine the metabolism of oxygen, or the amount of oxygen being used by a patient. For this purpose, it is necessary to also measure carbon dioxide (CO2) levels. It is possible that it can also be used to detect abnormalities in ventilation. However, the use of a pulse oximeter to detect hypoventilation is impaired with the use of supplemental oxygen, as it is only when patients breathe room air that abnormalities in respiratory function can be detected reliably with its use. Therefore, the routine administration of supplemental oxygen may be unwarranted if the patient is able to maintain adequate oxygenation in room air, since it can result in hypoventilation going undetected.[42]

Because of their simplicity of use and the ability to provide continuous and immediate oxygen saturation values, pulse oximeters are of critical importance in emergency medicine and are also very useful for patients with respiratory or cardiac problems, especially COPD, or for diagnosis of some sleep disorders such as apnea and hypopnea.[43] Portable battery-operated pulse oximeters are useful for pilots operating in non-pressurized aircraft above 10,000 feet (3,000 m) or 12,500 feet (3,800 m) in the U.S.[44] where supplemental oxygen is required. Portable pulse oximeters are also useful for mountain climbers and athletes whose oxygen levels may decrease at high altitudes or with exercise. Some portable pulse oximeters employ software that charts a patient's blood oxygen and pulse, serving as a reminder to check blood oxygen levels.

Connectivity advancements have made it possible for patients to have their blood oxygen saturation continuously monitored without a cabled connection to a hospital monitor, without sacrificing the flow of patient data back to bedside monitors and centralized patient surveillance systems.[45]


Pulse oximetry solely measures hemoglobin saturation, not ventilation and is not a complete measure of respiratory sufficiency. It is not a substitute for blood gases checked in a laboratory, because it gives no indication of base deficit, carbon dioxide levels, blood pH, or bicarbonate (HCO3−) concentration. The metabolism of oxygen can be readily measured by monitoring expired CO2, but saturation figures give no information about blood oxygen content. Most of the oxygen in the blood is carried by hemoglobin; in severe anemia, the blood contains less hemoglobin, which despite being saturated cannot carry as much oxygen.

Erroneously low readings may be caused by hypoperfusion of the extremity being used for monitoring (often due to a limb being cold, or from vasoconstriction secondary to the use of vasopressor agents); incorrect sensor application; highly calloused skin; or movement (such as shivering), especially during hypoperfusion. To ensure accuracy, the sensor should return a steady pulse and/or pulse waveform. Pulse oximetry technologies differ in their abilities to provide accurate data during conditions of motion and low perfusion.[12][9]

Pulse oximetry also is not a complete measure of circulatory oxygen sufficiency. If there is insufficient bloodflow or insufficient hemoglobin in the blood (anemia), tissues can suffer hypoxia despite high arterial oxygen saturation.

Since pulse oximetry measures only the percentage of bound hemoglobin, a falsely high or falsely low reading will occur when hemoglobin binds to something other than oxygen:

Hemoglobin has a higher affinity to carbon monoxide than it does to oxygen, and a high reading may occur despite the patient's actually being hypoxemic. In cases of carbon monoxide poisoning, this inaccuracy may delay the recognition of hypoxia (low cellular oxygen level).

Cyanide poisoning gives a high reading because it reduces oxygen extraction from arterial blood. In this case, the reading is not false, as arterial blood oxygen is indeed high in early cyanide poisoning.[clarification needed]

Methemoglobinemia characteristically causes pulse oximetry readings in the mid-80s.

COPD [especially chronic bronchitis] may cause false readings.[46]

A noninvasive method that allows continuous measurement of the dyshemoglobins is the pulse CO-oximeter, which was built in 2005 by Masimo.[47] By using additional wavelengths,[48] it provides clinicians a way to measure the dyshemoglobins, carboxyhemoglobin, and methemoglobin along with total hemoglobin.[49]

Increasing usage

According to a report by iData Research the U.S. pulse oximetry monitoring market for equipment and sensors was over 700 million USD in 2011.[50]

In 2008, more than half of the major internationally exporting medical equipment manufacturers in China were producers of pulse oximeters.[51]

Early detection of COVID-19

Pulse oximeters are used to help with the early detection of COVID-19 infections, which may cause initially unnoticeable low arterial oxygen saturation and hypoxia. The New York Times reported that "health officials are divided on whether home monitoring with a pulse oximeter should be recommended on a widespread basis during Covid-19. Studies of reliability show mixed results, and there’s little guidance on how to choose one. But many doctors are advising patients to get one, making it the go-to gadget of the pandemic."[52]

What is the price of Pulse Oximeter Coronavirus (COVID-19) Product in Bangladesh?

The latest price of Pulse Oximeter Coronavirus (COVID-19) Product in Bangladesh is [price]. You can buy the Pulse Oximeter Coronavirus (COVID-19) Product at best price from our website or visit Unix Network Showroom Jessore Computer city . Unix Network offers you Pulse Oximeter Coronavirus (COVID-19) Product with the best price in Bangladesh Which, is your budget-friendly. We also offers you free shipping  with this Pulse Oximeter Coronavirus (COVID-19) Product. Order Online for nationwide cash on delivery or visit our Shop. Follow us on Facebook for regular updates and offers. Subscribe our Youtube channel for reviews of gadget Products. You can call mobile number 01715143685 for a free consultation.Your comments on the following topics will accelerate our progress.

Questions :
Have question about Pulse Oximeter Coronavirus (COVID-19) Product? Get specific details about this product from expert.
Pulse Oximeter Coronavirus (COVID-19) Product review
Pulse Oximeter Coronavirus (COVID-19) Product price
What is Pulse Oximeter Coronavirus (COVID-19) Product and its function?
What is Pulse Oximeter Coronavirus (COVID-19) Product used for?

Please ask your question  about Pulse Oximeter Coronavirus (COVID-19) Product .
Please login or register to ask question

Brand: china
Fingertip CMS-50D Audible Pulse Oximeter Description:Mini USB port, adjustable display brightness, alarm with a high and low limit, one-button operation, audible pulse sound and waveform graphical display, automatically turn off when not in use, low battery alarm, suitable for used in family / hosp..
Ex Tax:৳950.00
Brand: china
Fingertip FPX-033 Pulse Rate Oximeter Description:Color OLED display, SpO2 and pulse monitoring, and waveform display, low voltage alarm display, auto power-off, accurate readings of blood oxygen saturation and pulse rate.What is the price of Fingertip FPX-033 Pulse Rate Oximeter Pulse Oximeter in ..
Ex Tax:৳2,350.00
Description: IMDK C101A2 FDA & CE Certified Fingertip Pulse Oximeter Description:OLED display for an easy read, up to 8 hours of sleep monitoring, simultaneous display for testing value and graph, FDA / CE / RoHS approved, 70% – 99% SpO2 measurement range, 30 BPM~240 PR measurement range, powe..
Ex Tax:৳1,350.00
Brand: china
iMDK C101B1 Fingertip Pulse Oximeter Description:ABS material, LCD display, 70-99% measurement range, ± 2% accuracy, ± 1% resolution, 5℃-40℃ operating temperature, 70~106kPa air pressure, 30-240BPM measuring range, -10℃-40℃ storage temperature, 15-80% operating humidity, 2 x AAA battery, 64g weight..
Ex Tax:৳950.00
Brand: china
JN P-01 OLED Fingertip Pulse Oximeter Description:OLED two-color display with brightness adjustable, SpO2 / PR and perfusion index value display, 70~99% measuring range, ±1% blood oxygen saturation, 30BPM~240BPM pulse rate measuring, ±1BPM or ±1% of the measured value accuracy, 10ºC~40ºC storage te..
Ex Tax:৳850.00
Brand: Jumper
Jumper JPD-500D SpO2 OLED Pulse Oximeter Description:Color OLED display with brightness adjustable, 25bpm~250bpm PR measuring range, 0%~100% SpO2 measuring range, ±1bpm or ±1% accuracy, six display modes, four-direction display, blood perfusion index (PI) as low as 0.2%, low-voltage indication, pul..
Ex Tax:৳1,900.00
Brand: Jumper
Jumper JPD-500E Finger Pulse Oximeter Description:SpO2 measuring, pulse rate measuring, color OLED display, low battery indicator, alert function, automatic power-off, portable and lightweight, perfusion index display, brightness control, four-direction display and six display mode, big font displa..
Ex Tax:৳1,750.00
Brand: Jumper
Jumper JPD-801 SpO2 Pulse Oximeter Description:OLED color display with brightness adjustable, SpO2 / PR and perfusion index value display, user-friendly design, six display modes, four-direction display, blood perfusion index (PI) as low as 0.2%, pulse rate value display, bar graph display, low-vol..
Ex Tax:৳2,300.00
Pulse Oximeter
Call For Price
Brand: Non Brand
Pulse Oximeter CMS50DL Free Sample cheap finger pulse oximeter  Parameters:  Integrated with SpO2 probe and processing display module Small in volume,light in weight and convenient in carrying Operation of the product is simple ,low power consumption SpO2 value display Pulse rat..
Ex Tax:৳0.00
Brand: Rohs
Rohs OM-98 Finger Clip Pulse Rate Oximeter Automatic detection of finger position, fast SpO2 reading and pulse measurement, large digital OLED display, automatic shutdown after 8 seconds without a finger, energy-saving, long-term standby, lightweight for carrying and easy-to-use, manually adjust th..
Ex Tax:৳850.00
Showing 1 to 10 of 10 (1 Pages)