BDCOM ONU Price in jessore

BDCOM ONU is a fiber-optic networking solution designed for FTTH, FTTx, home broadband, office networking, ISP deployments, and other passive optical network applications. BDCOM offers a wide range of optical network units and ONTs, including GPON, EPON, XPON, Gigabit Ethernet, PoE, voice, CATV, and enterprise-oriented fiber access solutions.

At Unix Network, the BDCOM ONU category is designed for customers in Bangladesh who need reliable fiber networking equipment for broadband internet, home FTTH connections, offices, businesses, and professional network installations.

BDCOM GP1702-1G ONU

The BDCOM GP1702-1G is a compact XPON ONU designed for broadband fiber access. According to BDCOM's official specifications, it provides one SC/UPC PON port and one Gigabit RJ45 Ethernet port. The device supports GPON and EPON operation and is designed for integrated broadband access networks. :contentReference[oaicite:0]{index=0}

The GP1702-1G is particularly suitable for users who need a basic fiber termination device with a Gigabit Ethernet output and who have an ISP network compatible with the device.

BDCOM GP1702-1G Key Features

• XPON ONU architecture.
• Supports compatible GPON and EPON networks.
• 1 x SC/UPC optical PON port.
• 1 x Gigabit RJ45 Ethernet port.
• Supports VLAN functions.
• Supports MAC, LOID, and hybrid authentication methods.
• Supports bridge and routing-related network configurations depending on deployment and firmware.
• Supports OMCI and OAM management functions.
• Supports IGMP Snooping and multicast functions.
• Supports MAC filtering and port protection.
• Compact plastic enclosure.
• External 12V/0.5A power adapter.

BDCOM lists the GP1702-1G with a maximum power consumption of 6W and dimensions of approximately 80 × 75 × 24 mm. :contentReference[oaicite:1]{index=1}

What Is BDCOM GP1702-1G?

BDCOM GP1702-1G is an Optical Network Unit designed to connect a customer's Ethernet network to a compatible passive optical fiber network.

A typical installation can be arranged as:

ISP Network → OLT → Optical Splitter → Fiber → BDCOM GP1702-1G → Router → Computers and Wi-Fi Devices

The ONU receives the optical signal through the SC/UPC fiber interface and provides network connectivity through its Gigabit RJ45 Ethernet interface.

BDCOM GP1702-1G GPON ONU

The GP1702-1G supports GPON-based fiber access networks. BDCOM specifies support for ITU-T G.984/G.988 standards and lists GPON/EPON compatibility for the product series. :contentReference[oaicite:2]{index=2}

Before buying a GPON ONU, customers should confirm that their ISP uses a compatible GPON OLT and permits the use of third-party ONU equipment.

BDCOM GP1702-1G XPON ONU

The GP1702-1G is commonly described as an XPON ONU because it can operate with compatible GPON and EPON networks. BDCOM's official product information identifies it as an xPON ONU with GPON/EPON support. :contentReference[oaicite:3]{index=3}

This dual-mode capability makes the GP1702-1G more flexible than a single-technology ONU, although ISP and OLT compatibility must still be confirmed.

BDCOM GP1702-1G Ethernet Port

The GP1702-1G provides one Gigabit RJ45 Ethernet interface. This allows the ONU to connect to a Wi-Fi router, computer, firewall, switch, or other Ethernet networking equipment. :contentReference[oaicite:4]{index=4}

For customers using a separate wireless router, the GP1702-1G can serve as the fiber termination device while the router manages Wi-Fi and the local network.

BDCOM GP1702-1G for Home Internet

The BDCOM GP1702-1G can be suitable for home FTTH connections when the ISP's optical network is compatible. Its compact design and single Gigabit Ethernet interface make it appropriate for basic residential fiber installations.

A common home configuration is:

Fiber → BDCOM GP1702-1G → Wi-Fi Router → Phones, Computers, Smart TVs and Other Devices

BDCOM GP1702-1G for Office

In an office environment, the GP1702-1G can act as the optical termination device before a business router or firewall.

The downstream router can then connect to switches, computers, printers, CCTV systems, wireless access points, VoIP equipment, and other network devices.

BDCOM GP1702-1G for FTTH

FTTH means Fiber to the Home. In an FTTH deployment, optical fiber is delivered to the customer's premises and terminated by an ONU or ONT.

The GP1702-1G is designed for this type of fiber access environment. BDCOM describes the model as an FTTH/O ONT with one XPON port and one Gigabit Ethernet port. :contentReference[oaicite:5]{index=5}

BDCOM GP1702-1G Specifications

Specification	BDCOM GP1702-1G
Device Type	XPON ONU / ONT
PON Technology	GPON / EPON
PON Port	1 x SC/UPC
Ethernet Port	1 x Gigabit RJ45
Authentication	MAC / LOID / Hybrid
Optical TX Power	0.5 to 5 dBm
RX Sensitivity	-28 dBm
Power Input	100-240V AC adapter
Power Output	12V / 0.5A
Maximum Power Consumption	6W
Dimensions	80 × 75 × 24 mm
Fiber Connector	SC/UPC

The specifications above are based on BDCOM's official product information. :contentReference[oaicite:6]{index=6}

BDCOM GP1702-1G SC/UPC Connector

The GP1702-1G uses an SC/UPC optical interface. Customers should therefore make sure the existing fiber connection and patch cord are appropriate for an SC/UPC PON connection.

Fiber connectors should be kept clean and handled carefully. Dirt or damage on an optical connector can affect signal quality and may cause connection problems.

BDCOM GP1702-1G VLAN Support

BDCOM specifies extensive VLAN functionality for the GP1702-1G, including 4K VLAN, port-based VLAN, IEEE 802.1Q VLAN, tag, transparent, aggregation, trunk, and translation modes. :contentReference[oaicite:7]{index=7}

This makes the device suitable for network environments where VLAN configuration is required by the ISP or network administrator.

BDCOM GP1702-1G Authentication

The GP1702-1G supports MAC, LOID, and hybrid authentication mechanisms according to BDCOM's specifications. :contentReference[oaicite:8]{index=8}

The exact authentication method used depends on the ISP's OLT and subscriber provisioning system.

BDCOM GP1702-1G and OLT Compatibility

An ONU communicates with an OLT located on the ISP side of the fiber network. The OLT manages the optical access network and communicates with multiple ONUs through the passive optical distribution system.

A typical network architecture is:

Internet → ISP Core Network → OLT → Optical Splitter → Fiber → BDCOM ONU → Router

BDCOM states that the GP1702-1G is designed for interoperability with mainstream OLT manufacturers, but customers should still confirm compatibility with their particular ISP before purchasing. :contentReference[oaicite:9]{index=9}

Can BDCOM GP1702-1G Replace ISP ONU?

It may be possible to replace an ISP-provided ONU with a BDCOM GP1702-1G if the ISP permits third-party ONU equipment and can register the device with its OLT.

Before replacing the existing ONU, ask the ISP about supported ONU models, authentication requirements, LOID or serial-number registration, VLAN configuration, and optical specifications.

BDCOM GP1702-1G Bridge Mode

When configured in bridge mode, the ONU can pass the ISP connection to a separate router. The external router can then handle PPPoE authentication, NAT, DHCP, firewall, VPN, QoS, and Wi-Fi functions.

This is a useful configuration for users who want to use a dedicated TP-Link, Mercusys, Netis, or other Wi-Fi router.

BDCOM GP1702-1G Router Mode

Depending on the configuration and firmware, the GP1702-1G can also be used in routing-oriented network deployments. BDCOM's product documentation lists management and service-control capabilities including VLAN, QoS, authentication, and other networking functions. :contentReference[oaicite:10]{index=10}

BDCOM GP1702-1G PPPoE

BDCOM documentation for the GP1702 series identifies PPPoE support. :contentReference[oaicite:11]{index=11}

If your ISP uses PPPoE, the appropriate PPPoE username and password must be configured according to the ISP's network design.

BDCOM GP1702-1G QoS

The GP1702-1G supports QoS-related functions including IEEE 802.1p and CoS, multiple priority queues, scheduling algorithms, port rate limiting, SLA, and DBA. :contentReference[oaicite:12]{index=12}

These functions can help manage traffic priorities in compatible network deployments.

BDCOM GP1702-1G Multicast Support

The GP1702-1G supports IGMP Snooping and other multicast-related functions. BDCOM also lists multicast group limitation and fast-leave functions. :contentReference[oaicite:13]{index=13}

This can be useful in networks carrying IPTV or other multicast services when supported by the ISP.

BDCOM GP1702-1G Security Features

BDCOM provides several network security and control functions on the GP1702-1G, including MAC address limits, MAC filtering, and port protection. :contentReference[oaicite:14]{index=14}

Network administrators should configure these features according to the requirements of the network rather than enabling settings without understanding their effect.

BDCOM GP1702-1G Management

The GP1702-1G supports several management mechanisms, including HTTP, CLI, SNMP, TELNET, OMCI, OAM, and software upgrades through supported methods such as TFTP and web management. :contentReference[oaicite:15]{index=15}

The management options available to an end user can depend on the ISP's configuration and firmware.

BDCOM GP1702-1G LOS Problem

If the LOS indicator remains active or the ONU does not receive the expected optical signal, possible causes include a disconnected fiber, damaged cable, dirty connector, optical power problem, ISP outage, or another fiber-network fault.

• Check the fiber connection.
• Check for visible damage to the fiber cable.
• Avoid sharp bends in the fiber.
• Do not touch the optical connector surface.
• Check whether other customers on the same ISP connection are affected.
• Contact the ISP or a qualified fiber technician if the problem continues.

BDCOM GP1702-1G PON Light Problem

If the PON indicator does not reach the expected registered state, the ONU may not be successfully communicating with the ISP's OLT.

Possible causes include incorrect ONU authentication, unsupported OLT compatibility, incorrect provisioning, poor optical signal, or an ISP-side configuration problem.

BDCOM GP1702-1G No Internet

If the PON connection is working but there is no internet access, check the WAN configuration, PPPoE credentials, VLAN settings, router configuration, and ISP service status.

If the GP1702-1G is operating in bridge mode, the downstream router may be responsible for PPPoE authentication.

BDCOM GP1702-1G Troubleshooting

• Check the power adapter.
• Check the optical fiber connection.
• Check the PON status.
• Check the LOS indicator.
• Check the Ethernet cable.
• Restart the ONU and router when appropriate.
• Verify PPPoE credentials.
• Verify VLAN settings.
• Check router WAN configuration.
• Confirm ONU registration with the ISP.
• Contact the ISP if the ONU cannot register.

BDCOM GP1702-1G for 1 Gbps Internet

The GP1702-1G provides a Gigabit Ethernet interface, making it suitable for many fiber broadband installations where a Gigabit Ethernet connection is sufficient. :contentReference[oaicite:16]{index=16}

Actual internet performance depends on the ISP package, PON network, optical conditions, router, Ethernet cable, client hardware, and network traffic.

BDCOM GP1702-1G vs Basic GPON ONU

Feature	BDCOM GP1702-1G	Basic GPON ONU
PON Technology	GPON/EPON XPON	Usually GPON only
Optical Port	SC/UPC	Depends on model
Ethernet	1 × Gigabit RJ45	Depends on model
Authentication	MAC / LOID / Hybrid	Depends on model
VLAN	Advanced VLAN functions	Depends on model
Management	Multiple management options	Depends on model

BDCOM GP1702-1G vs VSOL ONU

Feature	BDCOM GP1702-1G	VSOL XPON ONU
GPON Support	Yes	Selected models
EPON Support	Yes	Selected XPON models
XPON	Yes	Yes on selected models
Gigabit Ethernet	1 × GE	Depends on model
Wi-Fi	No on GP1702-1G	Available on selected models
ISP Compatibility	Must be verified	Must be verified

For a simple fiber-to-Ethernet connection, the BDCOM GP1702-1G can be an appropriate choice. Customers who need integrated Wi-Fi should consider a suitable Wi-Fi ONU or use a separate wireless router.

BDCOM GP1702-1G Price in Bangladesh

The price of BDCOM GP1702-1G in Bangladesh can vary depending on supplier, stock, warranty, import costs, and market conditions. Current Bangladeshi retailer listings show this model as a Gigabit GPON/ONU product, but customers should check the latest Unix Network listing for the current selling price and availability. :contentReference[oaicite:17]{index=17}

Price and stock may change without prior notice. Customers should confirm the exact model, current price, stock status, warranty, and ISP compatibility before placing an order.

Buy BDCOM ONU in Bangladesh

If you are looking to buy a BDCOM ONU in Bangladesh, first identify the PON technology used by your ISP. Then check whether the ISP supports BDCOM equipment and whether the specific model can be registered on the provider's OLT.

For the BDCOM GP1702-1G, customers should verify the SC/UPC fiber connection, GPON/EPON compatibility, Gigabit Ethernet requirement, authentication method, VLAN configuration, and ISP provisioning requirements.

Unix Network provides computer, networking, CCTV, and IT products and services in Jashore, Bangladesh. Customers can explore BDCOM ONU, OLT, routers, switches, fiber networking equipment, access points, and other networking products through the Unix Network eCommerce website.

Best BDCOM ONU for Home

For a home user who already has a separate Wi-Fi router, the BDCOM GP1702-1G can be a practical choice when it is compatible with the ISP's network. Its single Gigabit Ethernet port provides a straightforward connection to the router.

Users who want an all-in-one fiber gateway with Wi-Fi should consider a different BDCOM model that includes integrated wireless functionality.

Best BDCOM ONU for Office

For a small office, the GP1702-1G can be used as the optical termination device before a router or firewall. The downstream network can then distribute the connection through Ethernet switches and wireless access points.

Frequently Asked Questions About BDCOM ONU

What is BDCOM ONU?

BDCOM ONU is an optical network unit used to connect a compatible fiber-optic access network to customer-side Ethernet and other networking equipment.

What is BDCOM GP1702-1G?

BDCOM GP1702-1G is a compact XPON ONU with one SC/UPC PON port and one Gigabit RJ45 Ethernet port. BDCOM specifies GPON/EPON support for the model. :contentReference[oaicite:18]{index=18}

Is BDCOM GP1702-1G a GPON ONU?

Yes. It supports compatible GPON networks and is also designed for EPON operation as an XPON ONU. :contentReference[oaicite:19]{index=19}

Is BDCOM GP1702-1G compatible with EPON?

Yes. BDCOM identifies the GP1702-1G as an xPON ONU supporting GPON and EPON. :contentReference[oaicite:20]{index=20}

Does BDCOM GP1702-1G have a Gigabit port?

Yes. It has one Gigabit RJ45 Ethernet port. :contentReference[oaicite:21]{index=21}

Does BDCOM GP1702-1G have Wi-Fi?

No. The GP1702-1G itself is a one-port Gigabit Ethernet ONU and does not include integrated Wi-Fi. A separate Wi-Fi router can be connected to its Ethernet port.

Can I connect a TP-Link router to BDCOM GP1702-1G?

Yes. A compatible TP-Link router can be connected to the Gigabit Ethernet port of the GP1702-1G. The appropriate WAN configuration depends on the ISP.

Can I use BDCOM GP1702-1G with a Mercusys router?

Yes. A Mercusys router can be used as the downstream wireless router when the ONU and ISP connection are configured correctly.

Can BDCOM GP1702-1G work with all ISPs?

No. ISP compatibility must be confirmed. The ONU needs to be compatible with the provider's PON technology, OLT, authentication, provisioning, and service configuration.

What fiber connector does BDCOM GP1702-1G use?

The GP1702-1G uses one SC/UPC PON port. :contentReference[oaicite:22]{index=22}

Does BDCOM GP1702-1G support VLAN?

Yes. BDCOM lists 4K VLAN, port-based VLAN, IEEE 802.1Q VLAN, tagging, translation, trunk, aggregation, and other VLAN functions. :contentReference[oaicite:23]{index=23}

Does BDCOM GP1702-1G support LOID?

Yes. BDCOM lists MAC, LOID, and hybrid authentication among the supported XPON service features. :contentReference[oaicite:24]{index=24}

Does BDCOM GP1702-1G support PPPoE?

BDCOM's GP1702 series information lists PPPoE support. :contentReference[oaicite:25]{index=25}

What should I do if BDCOM GP1702-1G shows LOS?

Check the fiber connection and optical cable first. If the LOS condition continues, contact the ISP or a qualified fiber technician because the problem may involve optical signal levels, the fiber distribution network, or ISP-side equipment.

Final Thoughts on BDCOM ONU

BDCOM provides a broad range of ONU and ONT products for FTTH, FTTx, home broadband, business networking, ISP deployments, and specialized fiber access applications. The GP1702-1G is a compact XPON model that combines GPON/EPON compatibility with one SC/UPC optical port and one Gigabit Ethernet interface. :contentReference[oaicite:26]{index=26}

For users who need a simple fiber-to-Ethernet connection, the GP1702-1G can be a strong option when supported by the ISP. Its XPON capability, VLAN features, authentication options, Gigabit Ethernet interface, and compact design make it suitable for a variety of FTTH installations.

However, ISP compatibility should always be confirmed before purchase. The correct ONU depends on the ISP's PON technology, OLT, authentication system, optical requirements, VLAN configuration, and equipment policy.

Why Buy BDCOM ONU from Unix Network?

Unix Network is a computer, networking, CCTV, and IT solutions provider in Jashore, Bangladesh. The business offers networking products and accessories for home users, offices, shops, businesses, ISP-related installations, and professional network deployments.

Customers looking for BDCOM ONU can compare available models according to PON technology, Ethernet speed, number of ports, networking features, specifications, price, availability, and warranty through the Unix Network eCommerce website.

Product prices and stock may change without prior notice. Customers should confirm the latest price, availability, exact model, ISP compatibility, specifications, and warranty before placing an order.